1 Attachment(s)
Manufacturing options for piece attached
Hi all,
Coming outside of engineering, I'm looking for advice on my options to get something like this manufactured:
[IMG]http://www.engineersedge.com/engineering-forum/attachment.php?attachmentid=1821&stc=1[/IMG]
The sizes are not final, and can be adjusted to what's feasible.
That being said, the sample in the picture is 4"x2.5", its thickness is 0.05125" (1/32" opening + 2x0.01" walls), the holes are 1" wide and go 2.375" deep.
The "card" is a pocket holder: one would put things in it, and carry it around in his/her pocket or bag.
I'm interested in the options to get this done both in plastic or metal.
The prototype I have is made from laser cut plastic sheets glued together, but I don't believe that that process would scale well.
Also, I have no clue, if this layering is possible for metals.
Any feedback or pointers are welcome.
-Greg