Share |

Results 1 to 2 of 2

Thread: Pump room design for fire fighting application.

  1. #1
    Associate Engineer
    Join Date
    Feb 2013
    Posts
    3

    Pump room design for fire fighting application.

    Hello can anybody guide me how to make a pump room layout for fire fighting appplications. Does anyone here have any schematic drawings for the same. This is a wet riser system with a single riser and also has diesel pump, electrical and jockey pump. I would like to know in detail about the valve package that usually comes in here. Thanks in advance.

  2. #2
    Technical Fellow Kelly Bramble's Avatar
    Join Date
    Feb 2011
    Location
    Bold Springs, GA
    Posts
    1,421
    Quote Originally Posted by vishnu3495 View Post
    Hello can anybody guide me how to make a pump room layout for fire fighting appplications. Does anyone here have any schematic drawings for the same. This is a wet riser system with a single riser and also has diesel pump, electrical and jockey pump. I would like to know in detail about the valve package that usually comes in here. Thanks in advance.
    Well, here's a link to course titled "Introduction Architectural Design of Fire Stations, 2 PDH".

    Never been invovled in fire station design...

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •