Share |

Results 1 to 2 of 2

Thread: Overriding the Envelope Requirement in ISO GPS

  1. #1
    Engineer
    Join Date
    Dec 2011
    Location
    Kansas
    Posts
    11

    Overriding the Envelope Requirement in ISO GPS

    If I have a drawing where the envelope requirement is made the default by a general note, reference to ISO 2768...-E, or other means, and I want to override the envelope requirement and have the independency principle apply to one feature of size on the drawing, how would I do that? The "I" symbol is not recognized by ISO. I was thinking I could specify a straightness tolerance with a value greater than the size tolerance, but why would that override the envelope requirement?

    Any suggestions for overriding the envelope requirement in these cases? I don't want to use notes as these drawings may be used anywhere in the world.

  2. #2
    Technical Fellow Kelly Bramble's Avatar
    Join Date
    Feb 2011
    Location
    Bold Springs, GA
    Posts
    1,422

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •