Results 1 to 2 of 2

Thread: GDand T of slot

  1. #1
    Associate Engineer
    Join Date
    Apr 2012
    Posts
    3

    GDand T of slot

    slot.jpgHow much movement on "X" ans "Y" of this called out do I have?
    Attached Files Attached Files

  2. #2
    Technical Fellow Kelly_Bramble's Avatar
    Join Date
    Feb 2011
    Location
    Bold Springs, GA
    Posts
    2,611
    X = Left <---> Right

    When manufactured @ MMC = 8.7 (9 - 0.3) max position 1.0 = or +/- 0.5 from perfect
    When manufactured @ nominal = 9 (9 + 0.0) max position 1.3 = or +/- 0.65 from perfect
    When manufactured @ LMC = 9.3 (9 + 0.3) max position 1.6 = or +/- 0.8 from perfect

    y = Up and Down

    When manufactured @ MMC = 3.7 (4 - 0.3) max position 3.0 = or +/- 1.5 from perfect
    When manufactured @ nominal = 4 (4 + 0.0) max position 3.3 = or +/- 1.65 from perfect
    When manufactured @ LMC = 4.3 (4 + 0.3) max position 3.6 = or +/- 1.8 from perfect

    See and buy: Geometric Boundaries II - ASME Y14.5-2009

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •