B29.10M - Heavy Duty Offset Sidebar Power Transmission Roller Chains and Sprocket Teeth
Description: This Standard includes information for Heavy Duty Offset Sidebar Power Transmission Roller Chains; General Chain Designators; Chain Assembly; and Sprocket Tooth Form. There are also tables for General Chain Dimensions M.U.T.S., Strand Length and Measuring Load; Maxi- mum and Minimum Controlling Link Dimensions for Interchangeable Chain Links; Chain Clearance Dimensions; Maximum Eccentricity and Face Runout Tolerance; and Sprocket Factors. and mm; Dimensional Limits, in. and mm (Straight Link Plate Extension With One and Two attachment Holes, Small Roller Series); Dimensional limits, in. and mm (bent link plate extension with one and two attachment holes, small roller series); Dimensional limits, in. and mm (Conveyor Chain With Extended Pin, Small and Large Roller Series); Sprocket Tooth Section Profile Dimensions, in. and mm; Maximum Eccentricity and Face Runout Tolerances for Commercial Sprockets (Measured as Total Indicator Reading), in. and mm; Minus Tolerances on the Bottom or Caliper Diameters of Sprockets for Various Numbers of Effective Teeth, in. and mm; and Sprocket Factors, Small and large series.
Category: ASME Engineering Standards Specifications
Download Not Available
© Copyright 2000 - 2012, by Engineers Edge, LLC All rights reserved.
Disclaimer
|
|
