|
|
|
Search
|
|
| |
| |
|
| « Prev Page | Next Page » |
Pages: 1 2 3 [4] 5 6 7 >> |
| B18.8.100M - Spring Pins: Coiled Type, Spring Pins: Slotted, Machine Dowel Pins: Hardened Ground, and Groved Pins (Metric) |
|
This Standard covers the dimensional and general data for coiled spring pins
recognized as American National Standard, which are widely used in general
industrial applications. The inclusion of dimensional data in this Standard is
not intended to imply that all of the products described are stock production
sizes. Consumers should consult with suppliers concerning the availability of
the product.
See Spring and Roll
Pins Size Chart
|
|
|
| B18.25.3M - |
| Square and Rectangular Keys and Keyways: Width Tolerances and Deviations Greater Than Basic Size
|
|
|
| B18.27 - Tapered and Reduced Cross Section Retaining Rings (Inch Series) |
| This Standard covers complete general and dimensional data for three series of general purpose tapered and reduced cross section retaining rings, which may be used with the nominal size shafts and housings listed and in grooves of the recommended dimensions listed. Also included are formulas and tolerances on which dimensional data are based. Three appendices include guidance for assembly and recommended standard drawing formats. |
|
|
| B5.57 - Methods for Performance Evaluation of Computer Numerically Controlled Lathes and Turning Centers |
| This Standard establishes requirements and methods for specifying and testing the performance of CNC lathes and turning centers. in general industrial applications. These grooved pins have three grooves, equally spaced about their circumference, impressed longitudinally into their exterior surface, with nominal diameters D1, ranging from 1.5 mm to 12 mm, inclusive. |
|
|
| B18.18.5M - Inspection and Quality Assurance Plan Requiring In-Process Inspection and Control |
| This Standard outlines a Quality Assurance Plan for internally and externally threaded fasteners and accessories or associated parts. Provisions are included for sampling plans, inspection frequencies, control procedures, and record keeping. The basic structure of this plan outlines the quality assurance provisions for fasteners manufactured and processed using in-process controls. Included are fasteners produced by one manufacturing practice requiring records of in-process inspection and tests which are maintained by the producers. This Standard will be used in conjunction with other accepted standards for product, testing, gaging, and material, and, therefore, those provisions as well as packaging are not included herein. |
|
|
| B18.2.6 - Fasteners for use in Structural Applications |
|
This Standard covers the complete and dimensional data for four products in
the inch series recognized as American National Standard. Heavy hex nut
thickness formulas and those for width across flats and width across corners are
found in the Appendix of ASME B18.2.2.
See ANSI
/ ASME Hardware Chart and Guide and ISO
/ Metric Hardware Guide
|
|
|
| B18.2.3.10M - Square Head Bolts (Metric Series) |
|
This Standard covers the general and dimensional data for standard metric
series square head bolts. The inclusion of dimensional data in this Standard is
not intended to imply that all of the products described are stock production
items. Consumers should consult with suppliers concerning the availability of
products.
See ANSI
/ ASME Hardware Chart and Guide and ISO
/ Metric Hardware Guide
|
|
|
|
| « Prev Page | Next Page » |
Pages: 1 2 3 [4] 5 6 7 >> |
|
|
|
| Copyright
2000 - 2006 Engineers Edge |
|
|
