Y14.7.1 - Gear Drawing Standards-Parts 1: For Spur, Helical, Double Helical and Rack
Description: This Standard sets forth methods to be followed for specifying drawing data for gears operating on axes which are parallel. It is the purpose of this Standard to provide formats, nomenclature, and definitions for the following types of gears: Spur, Helical, Double-Helical, and Spur and Helical Racks. The minimum data for the various gear types are defined. Where additional data are required, methods for specifying these data are shown. Slight deviations for critical applications are recognized, provided general formats are maintained. These standards represent industry minimum standards. Closer tolerances that may be required on certain applications should be discussed with the knife manufacturer relative to the precision required for the application.
Category: ASME Engineering Standards Specifications
Download Not Available
© Copyright 2000 - 2012, by Engineers Edge, LLC All rights reserved.
Disclaimer
|
|
