F594-02 - Standard Specification for Stainless Steel Nuts
Description:
This specification covers the requirements for stainless steel nuts 0.25 to
1.50 in. in nominal diameter inclusive in a number of alloys in common use and
intended for service applications requiring general corrosion resistance.
Seven groups of stainless steel alloys are covered, including ten austenitic,
two ferritic, four martensitic, and one precipitation hardening.
Seven groups of stainless steel alloys are covered, including ten austenitic,
two ferritic, four martensitic, and one precipitation hardening.
| Group |
Alloys |
Condition |
|
|
|
| 1 |
304, 305, 304L, 384, 18-9LW, 302HQ |
(CW) |
cold workedD |
| 2 |
316, 316L |
(CW) |
cold worked |
| 3 |
321, 347 |
(CW) |
cold worked |
| 4 |
430 |
(CW) |
cold worked |
| 5 |
410 |
(H) |
hardened and tempered |
| 6 |
431 |
(H) |
hardened and tempered |
| 7 |
630 |
(AH) |
aged hardened |
Category: ASTM International Standards Specifications
Download Not Available
© Copyright 2000 - 2012, by Engineers Edge, LLC All rights reserved.
Disclaimer
|
|
