|
Filtration Table of Contents
| Air
Filter Supplier
To guard against damage from careless
handling and faulty installation procedures, a recessed
faceguard should be installed or designed across both faces of the filter
during fabrication. Woven or expanded metal with square
openings approximating 1/3 inch to 1/2 inch on a side have
proven satisfactory in largely preventing the inadvertent
intrusion of hands or other objects into the air filter pack. In
addition, a metal mesh faceguard provides added strength to
the filter unit, increasing resistance to transportation
damage and shock overpressure.
© Copyright 2000 - 2008, by Engineers Edge, All rights reserved. Disclaimer
|
