Share |

Re: Deflection in an aluminum plate

---

[ Home ][ Forum Archive ] [ Active Engineering Forum ]

Posted By<" ">Tommy Channell on April 30, 2002 at 08:48:00:

In Reply to: Deflection in an aluminum plate posted byJorge on April 26, 2002 at 02:00:08:

Jorge,

Basically what you have there is a composite structure. Without getting into a lot of theory, see if you can find a ME handbook or reference manual.

Since it is a composite structure, your forces and stresses will be multiplied by a factor which is the ratio E/E (weakest).

These books will give you more information.

Follow Ups

< "> Subject: Re: Re: Deflection in an aluminum plate

Comments:: Jorge, : Basically what you have there is a composite structure. Without getting into a lot of theory, see if you can find a ME handbook or reference manual. : Since it is a composite structure, your forces and stresses will be multiplied by a factor which is the ratio E/E (weakest). : These books will give you more information.

[ Home ][ Forum Archive ] [ Active Engineering Forum ]