Suitable Sanding Wheel for Aluminium
	Post Reply		Engineering Forum

Posted by: pak_palay ® 12/20/2008, 09:58:52 Author Profile eMail author Edit

Dear sir, Is there a gringing wheel which is appropriate for Al(grade 19000).we are using sanding disc 36 grid and 120 grid.earlier we were used 36 grid and radial flap (all are aluminium oxide).while grinding al metals clog with that disc.we are appling greese to prevent this.But the life of grinding disc is also very low.Can u pls give me some solution.(pls remember after finishing we ae have to Paint wheel mark should not affect the product) Thanks A.Pakshi.

Post Reply Tell a Friend (must be logged in) Alert Admin About Post

View All

Previous | Next |

Replies to this message

: Suitable Sanding Wheel for Aluminium
: Suitable Sanding Wheel for Aluminium -- pak_palay	Post Reply	Top of thread	Engineering Forum

Posted by: CCR5600Design ® 12/22/2008, 13:41:49 Author Profile eMail author Edit

Your best bet with this question is to direct it to a customer sales representative of an abrasives supplier. Call the vendor you currently use for your abrasives and ask them. If they cannot offer you any help, there are plenty of other companies with products who will fill your need. When you speak with the representative, be sure and let him/her know what material you are sanding/grinding and ask what speed they recommend the abrasive to be used. Ron

Post Reply Tell a Friend (must be logged in) Alert Admin About Post

Where am I? Original Top of thread

Previous |   |