Engineering Design Data: Menu - calculators

 
Engineering Calculators, Engineering equation and Formulas
  • FPDesign

  • Pulley Center Distance

  • std pipe weights

    • Prev Page | Next Page

    Pages: 1 2 [3] 4 5 6 >>

    Three Bars at Different Temperatures Stress Calculator
    Three Bars at Different Temperatures Calculator and Equations for Stress
    Pinned End Column Different Face Temperatures Calculator and Equations
    Moment, eccentricity on pin-ended column different face temperatures.
    Restrained Beam Different Face Temperatures Calculator and Equations
    Stress and moment forces on beam with with different face temperatures.
    Two Bars Different Temperatures Stress Calculator and Equations
    The bars are attached such that the cold bar restrains the expansion of the hot bar. The bars remain straight with no bending.
    Bar Restrained With Spring Uniform Heat Applied Calculator
    Bar Restrained With Spring and Uniform Heat Applied Calculator and Equations
    Bar Restrained One End and Gap on Other Formula and Calculator
    Bar Restrained Against One End and Gap on Other Stress and Force Calculator and Equations A bar rigidly mounted with uniform heat applied will expand and exert force and axial stress onto itself and adjoining surfaces.
    Restrained Beam Thermal Expansion Force Axial Stress Calculator
    When a structural element is subjected to a change in temperature, it will either expand or contract depending on whether the temperature change is an increases or decrease
    Helical Torsion Spring Reaction End Design Calculator and Equations
    Frequently, the limiting stress value in helical torsion springs is the stress value in the ends.
    Extension Spring Hook Design Calculator and Equations
    The hooks at the ends of extension springs are subjected to both tension (bending) and torsional stresses.
    Diameter Change in Compression Spring Calculator
    When a helical compression spring is compressed, an increase in the outside diameter occurs because the angularity of the coils changes so that it is nearly at a right angle to the axis.
    Prev Page | Next Page

    Pages: 1 2 [3] 4 5 6 >>

    © Copyright 2000 - 2024, by Engineers Edge, LLC All rights reserved.
    Disclaimer