1 Attachment(s)
Position tolerance exercises
Hello,
I'm solving some question about position tolerance from a book and there are two of them which I didn't understand what is wrong with my resolution. Could someone help me with it?
Picture for question 47 and 48:
[ATTACH=CONFIG]2743[/ATTACH]
47. For the feature control frame marked [COLOR=#ff0000][B]A[/B][/COLOR], how much datum feature shift is allowed if the datum feature is produced at 14.8 and has 0.5 perpendicularity error?
A. 0
[COLOR=#ff0000][B]B. 0.4 (official answer)[/B][/COLOR]
C. 0.5
D. 0.9
E. 1
F. 1.2
[B]My resolution:[/B]
Datum feature shift= MMB - rAME
MMB= MMC + Geo tol. (respecting datum precedence) = 15.2 - 0 (No geo. tol. is added since datum B (MMC) is primary datum and perpendicularity tolerance applied to B depends on A) = 15.2
rAME = uAME + perpendicularity error = 14.8 + 0.5 = 15.3
Datum feature shift= 15.2 - 15.3 = [COLOR=#ff0000][B]-0.1 (This value tells me that there is a inteference of 0.1 which is the opposite of datum shift porpuse)
[/B][/COLOR]-----------------------------------------------------------------------------------------------------------------------------------
48. For the feature control frame marked A, how much datum feature shift is allowed if the datum feature is produced at 15.2 and has zero perpendicularity error?
A. 0
B. 0.4
[COLOR=#ff0000][B]C. 0.5 (official awnser)[/B][/COLOR]
D. 0.9
E. 1
F. 1.2
[B]My resolution:
[/B]Datum feature shift= MMB - rAME
MMB= MMC + Geo tol. (respecting datum precedence) = 15.2 - 0 (No geo. tol. is added since datum B (MMC) is primary datum and perpendicularity tolerance applied to B depends on A) = 15.2
rAME = uAME + perpendicularity error = 15.2 + 0.5 = 15.2
Datum feature shift= 15.2 - 15.2 = [COLOR=#ff0000][B]0
[/B][/COLOR]-----------------------------------------------------------------------------------------------------------------------------------
In fact, both question seems to add the perpendicularity tolerance to MMB but isn't it breaking the datum precedence?
PS: I'm studying GD&T by myself trough the standard and some books. So I don't have any teacher guiding me who could solve the exercises.