Printable View
Hi, I need to hang two steel brackets similar to this one:
[IMG]https://cdn.aws.toolstation.com/images/141020-UK/800/14127.jpg[/IMG]
to a wall, with the long edges in the horizontal position. One plate below the other.
Then I'll fix a 35kg load on them, spread as follows: eight screws, two on the left and two on the right of each plate.
My question is what is a safe gauge (e.g., thickness) for the plates.
The plate edges would be about 50x180mm.
Thanks!
Hi Pholoaw
send me a sketch of what is in your mind and then I can simulate it in ANSYS software. so you can have the exact and trustable answer. My question is :are you going to use something like as a L shape bracket to keep the plates to the wall?
Enable Ginger[I]Cannot connect to Ginger[/I] Check your internet connection
or reload the browserDisable in this text fieldRephraseRephrase current sentenceEdit in Ginger×
[QUOTE=gholambaghery222;17447]Hi Pholoaw
send me a sketch of what is in your mind and then I can simulate it in ANSYS software. so you can have the exact and trustable answer. My question is :are you going to use something like as a L shape bracket to keep the plates to the wall? [/QUOTE]
Hi, thank for your kind offer. I'll see if I manage to sketch something. To answer your question: the plates will be fixed to a 38mm timber stud behind the plasterboard, via the central holes.
[QUOTE=gholambaghery222;17447]Hi Pholoaw
send me a sketch of what is in your mind and then I can simulate it in ANSYS software. so you can have the exact and trustable answer. My question is :are you going to use something like as a L shape bracket to keep the plates to the wall? [/QUOTE]
Hi, thank for your kind offer. I'll see if I manage to sketch something. To answer your question: the plates will be screwed to a 38mm timber stud behind the plasterboard, via the central holes.