1 Attachment(s)
Please help answer this question
Can someone please help answer the following questions?
[B]C3. [/B]Using the fixed fastener formula calculate the true position tolerance for the two patterns shown below. (Show your work).
C3.1. The size of the bolts are (diameter) 0.492 – 0.500 and the size of the clearance holes are (diameter) 0.520 – 0.536.
[IMG]file:///C:/Users/PETERB~1/AppData/Local/Temp/msohtmlclip1/01/clip_image002.png[/IMG]
C3.2 The size of the bolts are (diameter) 0.245 – 0.250 and the size of the clearance holes are (diameter) 0.2656 – 0.270.
C3.3 Use the floating fastener formula and calculate the true position tolerance for the above 4 hole pattern, given the size of the bolts are (diameter) 0.492 – 0.500 and the size of the clearance holes are (diameter) 0.520 – 0.536.
[IMG]file:///C:/Users/PETERB~1/AppData/Local/Temp/msohtmlclip1/01/clip_image004.png[/IMG]
C3.4 Using the floating fastener formula calculate the plus/minus tolerance for the holes shown above if the bolts are 0.370 – 0.375 and the clearance holes are 0.386 – 0.397.
C3.5 Repeat the above calculation using the fixed fastener formula.