Mechanical Gearbox Leverage System
Hi,
I'm hoping this is the right kind of forum for this so here goes -
I'm after some bearing advice. I have a 2 metre manual lever (class 2) and would like to put a bearing on the fulcrum that allows axial movement but no (or little) latteral(i'm sure thats not the right term) movement. I guess some kind of thrust bearing?
It's part of a leverage system for a heavy gearbox, so basically needs to be a sturdy bearing for a 2m lever that only allows axial movements. It's manual, for a manual gear box, ao while it needs to be able to withstand a good shove we are not talking epic forces.
Complete novice so any good advice os hugely appreciated.