Pressure testable burst disc....
Hi Everyone,
I have an application that requires burst discs to protect lines/equipment from over pressure, however, it is now a requirement of one of our customers to pressure test the entire piping assembly to 90% of yield, prior to operation...
Does anyone have any ides on how I can create a pressure testable burst disc?
for example, if the system needs to be pressure tested to 300 psig at 90% - but needs a burst disc at 150 psig for normal operation...
I know the simple answer would be to just install a "blank" disc when pressure testing, but this is not really a practical solution for what we are doing.
Cheers
Tom