1 Attachment(s)
Specifying perpendcularity for odd pipes
I have run into a challence with specification of perpendicularity - Google couldn't help
The setup:
A straight pipe with a non-circular cross-section is attatched to a cone. The center of the pipe must be perpendicular (within a tolerance) to the surface of the cone in one direction (like the grey pipe) - not tilted like the dark pipe in the pucture.
As far as I can see, it boils down to that the center-line of the pipe must meet the center-line of the cone within a certain distance.
How do I specify this using GD&T?
[ATTACH]2542[/ATTACH]
Thank you very much for your help.
Best regards, Carsten