I have a thin part to Design. The part is only 0.25 in ch thick and 1 inch length.Theres a slot inside and radius on all four corners. What type of fixture I can use to manufacture such a tiny part.
Printable View
I have a thin part to Design. The part is only 0.25 in ch thick and 1 inch length.Theres a slot inside and radius on all four corners. What type of fixture I can use to manufacture such a tiny part.
A stamping die? You left out a depth, type of material, production volume and other info that goes into a production decision.
See:
[U][URL="https://www.engineersedge.com/Engineering_White_Papers/Manufacturing/jig_and_fixture_design_manual_14484.htm"]Jig and Fixture Design Manual[/URL]
[URL="https://www.engineersedge.com/Engineering_White_Papers/Manufacturing/jig_and_fixture_design_treatise_14485.htm"]Jig and Fixture Treatise[/URL][/U]