4 Attachment(s)
Die design for sheet metal forming
Hi,
I want to design a die for sheet metal forming. In the current process, the component is manufactured by two processes. initially the sheet is bent to u shape and then it is put into the second die and formed to required shape...
[IMG]http://www.engineersedge.com/engineering-forum/attachment.php?attachmentid=1335&stc=1[/IMG][IMG]http://www.engineersedge.com/engineering-forum/attachment.php?attachmentid=1336&stc=1[/IMG][IMG]http://www.engineersedge.com/engineering-forum/attachment.php?attachmentid=1334&stc=1[/IMG]
step1 step2 step3
so now, i have to manufacture a die such that the required profile is obtained from single die. Here is the profile and the initial shape of workpiece.
[IMG]http://www.engineersedge.com/engineering-forum/attachment.php?attachmentid=1337&stc=1[/IMG]
It would be helpful if some one gives me the solution. this problem is not solved from 2006. Some one plz try simultaneously.