2 Attachment(s)
ReBuilding a pneumatic Press- Help!!
Hi all,
This is my first post, after searching the web i feel i'm in the right place!
I bought recently, as a project, a Flypress that had been pneumatically converted ( i a cylinder on top that simply pushed the ram down) max up and down strokes are limited by microswitches and the the cylinder has two 1/4" bsp connections - pretty standard i think. The pneumatic solenoid is missing and the wiring has been damaged and broken - the machine was put into storage and was working -but over the last year its been cannibalised by other projects and such like. I am a humble sheetmetal fabricator and although i'm very interested and have a little knowledge of pneumatics and basic electrics i need a bit of guidance regarding a wiring diagram. The machine still has a 150v auto transformer, on/off switch and microswitches in position . The machine was used previously for inserting bushes, i'm hoping to do simple folding and punching on it.
Thanks for looking and would appreciate any advice or links.
[IMG]https://www.engineersedge.com/engineering-forum/attachment.php?attachmentid=2042&stc=1[/IMG][IMG]https://www.engineersedge.com/engineering-forum/attachment.php?attachmentid=2043&stc=1[/IMG]
Dave