Printable View
I would like to simulate oxgen combustion in gas turbine using Aspen one. What calculation and/or which reactor should I use, because using Rgibbs gives wrong results. For example ( mass flow constant- assumption ) for O2=21% and N2=79% I got only 40 Celsius degree lower temperature than for O2=100%, which is of course absurd. Additionally for higher temperature is smaller efficiency. Any suggestions ?
Never heard on the software, a simple google search reveals it a specialized application for very vertical **********.
You should contact the software designers. I doubt there are many users random on any general engineering website.
[QUOTE=pawel77power;14918]I would like to simulate oxgen combustion in gas turbine using Aspen one. What calculation and/or which reactor should I use, because using Rgibbs gives wrong results. For example ( mass flow constant- assumption ) for O2=21% and N2=79% I got only 40 Celsius degree lower temperature than for O2=100%, which is of course absurd. Additionally for higher temperature is smaller efficiency. Any suggestions ?[/QUOTE]