Search:

Type: Posts; User: whknapper

Search: Search took 0.00 seconds.

  1. Okay! And I apologize if I came across as...

    Okay! And I apologize if I came across as questioning your answers or credentials, I did not intend to do either. So it sounds like the original sketch I attached has the pocket fully defined and...
  2. Kelly, Dimensioning the slot parallel to its...

    Kelly,

    Dimensioning the slot parallel to its centerline is probably more acceptable per the standard, but it drifts farther from the intent of this design, which is to control the y-component...
  3. Kelly, Unfortunately, that is not the intent...

    Kelly,

    Unfortunately, that is not the intent of the design. The intent is to have the slot tilted, but have an overall travel in the y-direction (relative to the top view) of 8 mm.

    The reason...
  4. Profile of a line: implied 'symmetric' constraint

    Hello,

    I have attached a sketch that is a simplified version of a slot profile I'm trying to constrain. My question is: is it properly communicated that the '8' dimension on the top view is...
Results 1 to 4 of 4