Type: Posts; User: supersonics29

Search: Search took 0.00 seconds.

  1. Help me design a Vacuum Drying system

    Hello all,

    I've been entrusted a project of developing a Vacuum Drying System for my company. This system will be used for instant drying of automotive parts after washing. Needless to say the...
  2. I already have a pressure gauge on my delivery...

    I already have a pressure gauge on my delivery line. This is clearly mentioned in my initial post.
  3. Determination of delivery pressure from pump in my Parts Washer

    We want to know how can we determine the pressure of the liquid at the delivery end of the pump. We have a centrifugal pump and a 2" pipeline at the delivery end. Pump delivery performance as per...
  4. Replies

    Chain Conveyor Speed Calculation!

    Okay this has has been driving me crazy.

    I would like to know how a conveyor speed can be calculated on the basis of chain pitch, sprocket PCD & no. of teeth and output RPM of gearmotor.

  5. Replies

    JBoggs, Sorry for bumping this after such a long...

    JBoggs, Sorry for bumping this after such a long time.

    It was the Solenoid Valve. A exhaust centre 5/3 valve did the trick!

  6. Replies

    Thanks for the response. I did try using two...

    Thanks for the response.

    I did try using two PO check valves, one at each port. But as soon as I remove the air supply from the pilot valve in the PO check valve mounted on the 'rear' end of the...
  7. Replies

    Pneumatic safety valve question

    I am developing a machine which consists of a horizontally mounted cylindrical drum, where the door is front mounted, top opening pneumatically actuated (Picture enclosed).

    The door is lifted up...
  8. Machine malfunction due to Cantilever design!

    Hello all!

    This is my first post here. I work for a machine design & manufacturing firm. We also do machine repairs & refurbishing work.

    We currently have taken up a project where-in an we...
  9. Machine Parts requiring cleaning in Steel Mills?

    Hello all!

    I have recently started a Parts Cleaning Machine manufacturing business. Most of my clients are Automobile Manufacturers & Ancillaries.

    The last couple of years have been disastrous...
  10. Selection of Pump for Parts Cleaning Machines


    Budding entrepreneur here looking for help.

    I've had this doubt for a long time. I can read the pump performance curves with respect to Head & Q. So if I have to select a pump that gives...
  11. Water. Plain moisture to be precise.

    Water. Plain moisture to be precise.
  12. Infrared Drying for firecrackers. Possible?


    We've been entrusted the job of building a dryer for firecrackers. We were approached by a huge firecracker manufacturing firm here for the job. The current MO of drying is simply laying...
Results 1 to 12 of 12