Search:

Every conversation between myself and a perpetual motion enthusiast.

Though there is never any math just a flawed concept..
2539

Well, no easy answer as nobody knows what geometry, material, environment your system is operating in.

First thing you need is the a rough estimate of the airflow needed to dissipate a given...

(My opinion) I would seek opportunity before money early in your career. As you build skill sets combined with academic training other opportunities will present themselves. I understand the...

Without pressure applied details, local specifications, end goal of performing soil testing - not sure what you need..

However, here is a document that maybe helpful.

2535

Have they provided any part mold-ability recommendations? Poor part design will be tough to mold.

See the following webpage:

https://www.engineersedge.com/beam_bending/structural_beam_stress_and_deflection_13746.htm

Structural Beam Stress and Deflection Analysis

Stainless steel screws against Aluminum is not that big of a deal - paint the connection.

To stop corrosion do one or all of the the following:

1) Eliminate the Oxygen at the dissimilar metal...

The MMC & LMC modifier define a variable tolerance boundary based on the size of the as-manufactured FOS. These modifiers will will not control the effective as-manufactured size to the minimum size....

We assume an idealized behavior of a support in order to simplify the analysis. Generally, one would assume a x-y analysis separate from an x-z.

I think your instinct is correct in that a roller...

K.Shirane
I.Aoki
TakayukiTokimoto

https://www.sciencedirect.com/science/article/abs/pii/003259108580019X

And an important quote:


"Over the long run, technological advance creates new goods and services, raises national income, and increases the demand for labor throughout the economy. However, it...

The “lump of labor” fallacy is the assumption that there is a fixed amount of work, which determines the number of jobs in an economy. The new Page One Economics issue explains why this isn’t true...

Engineers Edge does have a Stress-Strain curve Approximation calculator based on the Ramburg-Osgood equations.

Enter known data and the curve data points are calculated plotted and tabulated.
...

Breakout a detail view and indicate the number of occurrences that geometry occurs. Using the same datum order of precedence indicates a simultaneous requirement.

According to Solidworks, yes.. But know that you need to understand the whole system requirements.

See: https://www.solidworks.com/support/hardware-certification

You need to study up on Mohr's Circle for plane stresses.

Start here..
https://www.engineersedge.com/material_science/mohrs-circle-stress-plane.htm

Python is a programming language, Civil engineering is a field of practice in engineering.

The programming language used in any application does not matter - the app functionality does.

Pick a...

Also, ASME Y14.5-2018, Paragraph 5.4.

and

ASME Y14.5M-1994, paragraph 2.4

and

ANSI Y14.5M-1982, paragraph 2.4

'

ASME Y14.5-2009, Paragraph 2.4 "Interpretation of Limits"

2513

This is very-very basic knowledge, your organization needs training ASAP.

See:

ASME, ISO or whatever...

Tolerances are not rounded. Flatness .001 = .0010000000000000000000000000000000000..... infinity

Your metrology equipment should be 10X more repeatable for imperial...

I always wait a few months or one release before I upgrade any software.

This avoids the challenges with bugs - I'm not interested nor have time to beta test software.

I'm going to type text in the order I verify..

ASME Y14.5-2009, read the following:

Most of section 1.7... specifically:

1.7.5.1

Section 1.8..

If beams are separate, spacing should be closer and maximum loading is understood per beam, stress, deflection, code requirements calculated and compared to design requirements.

If beams are...

All drafting practices including modern ASME and ISO specify that a blind hole starts from the surface which it is shown as non-hidden or by solid outlines.

Engineering drawings should be created...

Given vague - limited information..

The line showing the center bolt circle should be a center line.

On the 4 mm holes, what does "Full Dia" do? What else would the hole features be?
...