Results 1 to 3 of 3

Thread: Who can answer this question? Many thanks!

  1. #1
    Associate Engineer
    Join Date
    Aug 2012
    Posts
    1

    Who can answer this question? Many thanks!

    A bar of steel has following properties:Se=250MPa, Sy=500MPa and Su=800MPa for a reliability factor of 92%. For each of the cases below, when all the correction factors apart from Kc are equal to 1, find the factor of safty guarding against a static failure and either the factor of safty guarding against a fatigue failure or the expected life of the part with a reliability factor of 95%.
    (a) A tortional stress between 250MPa and -150MPa(negative)
    (b) the previous situation (a) with an added steady tensile stress of 50MPa

  2. #2
    Lead Engineer RWOLFEJR's Avatar
    Join Date
    Mar 2011
    Location
    Rochester Pennsylvania
    Posts
    396
    Hi Pip,
    Have a look at the forum rules here...
    http://www.engineersedge.com/enginee...Posting-Policy

  3. #3
    Technical Fellow
    Join Date
    Feb 2011
    Posts
    1,043
    Or -- better yet, consult the course notes. I have never seen a homework question set that had not yet been covered in basis in the Notes or Lectures.

    Is this really how you think you will behave as a qualified Engineer, should you ever graduate? Will this be your response when asked to design a structure? "OK boss, give me a few days to find out the answer on the Internet..."

    Hit the books and don't be so lazy Pipper!

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •