Results 1 to 2 of 2

Thread: Biocompatible Paint for medical product

  1. #1
    Associate Engineer
    Join Date
    Jun 2011
    Posts
    1

    Biocompatible Paint for medical product

    Hello,

    I've just registered to this forum today. I'm currently working on a project designing a desktop eye scanner. At the moment Iím helping to research biocompatible paint for the face plate and handles and the paint must meet ISO 10933. Does anyone know if such paint exists? The paint will only need to meet part of the 10933 as there will only be skin contact between the patient and the device.

    Using biocompatible paint was our second option as this gives us some flexibility in choosing the material. Initially we were looking at biocompatible plastic material with the 10933 standard however that proved quite difficult as we canít have polycarbonate in the material at all. I would be grateful if you have any knowledge to share on this matter.

  2. #2
    Senior Engineer Marky's Avatar
    Join Date
    Feb 2011
    Location
    New Hampshire
    Posts
    58

    Lightbulb

    Hi Lisa,

    Having worked in the medical product industry for several years we tried to stay away from painted surfaces coming in contact with skin. Paint most times retains germs etc and is difficult to sanitize.

    We most times used a colored plastic or a plated metal.

    If you need to use a paint...simply work with your paint vendor and see if they can use a "Microban" inhibitor. www.microban.com.

    Good Luck

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •