Results 1 to 1 of 1

Thread: Building Wind Loading Analysis Wall Components and Cladding

  1. #1
    Principle Engineer Cragyon's Avatar
    Join Date
    Feb 2013
    Location
    Newark, NJ
    Posts
    211

    Building Wind Loading Analysis Wall Components and Cladding

    Down Access for:

    Building Wind Loading Analysis Wall Components and Cladding

    Worksheet Name Description

    Wall C&C Analysis of wall Components and Cladding
    Wind Map Basic wind speed map (Figure 6-1 of ASCE 7-02 Code)

    Program Assumptions and Limitations:

    1. This program assumes only enclosed or partially enclosed buildings. Open buildings are NOT considered.
    2. Worksheet for Simplified analysis is applicable for low-rise buildings meeting the criteria of Section 6.4.1.
    3. In the worksheet for Simplified analysis, the design MWFRS wind load is calculated for each direction.
    The design MWFRS load is assumed to be the total wind load on either the width or the length of the
    building respectively.


    Exhaustive list of Engineers Edge Engineering Calculators.


    Online Calculator:
    http://www.engineersedge.com/civil_e...lysis_clad.htm
    Last edited by Kelly Bramble; 11-08-2015 at 10:18 AM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •