Down Access for:
Building Wind Loading Analysis Wall Components and Cladding
Worksheet Name Description
Wall C&C Analysis of wall Components and Cladding
Wind Map Basic wind speed map (Figure 6-1 of ASCE 7-02 Code)
Program Assumptions and Limitations:
1. This program assumes only enclosed or partially enclosed buildings. Open buildings are NOT considered.
2. Worksheet for Simplified analysis is applicable for low-rise buildings meeting the criteria of Section 6.4.1.
3. In the worksheet for Simplified analysis, the design MWFRS wind load is calculated for each direction.
The design MWFRS load is assumed to be the total wind load on either the width or the length of the
Exhaustive list of Engineers Edge Engineering Calculators.
Last edited by Kelly Bramble; 11-08-2015 at 09:18 AM.