Results 1 to 3 of 3

Thread: Help needed on a gear/cog project

  1. #1
    barkera2
    Guest

    Help needed on a gear/cog project

    HI all.


    I am a complete novice when it comes to gear mechanics. However I am hoping for some advice or assistance in how i can go about a project i am working on.


    Basically, what I want to create is something similar to this:

    Attachment 621

    So a planetary cog system which when operated turns the inner cogs. I want the big gear to be rotated from a smaller one on the outside. As shown in the image.


    In effect, what I want to create is a phrase which, when turned slots back into place. See image below:




    Attachment 622


    I will be so appreciated with any help as to how i can bring my drawings to life and create the installation as a physical working operation.


    Thank you.

  2. #2
    Principle Engineer
    Join Date
    Mar 2011
    Posts
    175
    Can't seem to open your files.

  3. #3
    Technical Fellow
    Join Date
    Feb 2011
    Posts
    1,043
    ...and if Zeke can't open them I am not even interested in clicking the links.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •