Results 1 to 3 of 3

Thread: clamping force

  1. #1
    Associate Engineer
    Join Date
    Jul 2013
    Posts
    2

    clamping force

    Please help me in calculating the clamping force of a shaft collar which was cut to 3 pieces and was hold together by 3 X m14 bolts with preload force of 86 kN.each.

  2. #2
    Administrator Kelly Bramble's Avatar
    Join Date
    Feb 2011
    Location
    Bold Springs, GA
    Posts
    2,344
    How about a drawing or enough information so WE can help you?

  3. #3
    Associate Engineer
    Join Date
    Jul 2013
    Posts
    2
    Collar which was cut to 3 and held together by 3X 14mm zinc plated bolts is clamped to a 192 mm hollow 316 s/s shaft. What will be the required clamping force of the collar to the shaft which rotates at 1500 rpm in order to withstand the force of say 100 kN axially directed to the shaft?
    Last edited by Neophyte; 07-14-2013 at 04:48 AM.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •