Results 1 to 3 of 3

Thread: Help with nomenclature?

  1. #1
    Project Engineer CCR5600Design's Avatar
    Join Date
    Feb 2011
    Location
    Central USA
    Posts
    128

    Help with nomenclature?

    I have been picking my brain, trying to figure out what to type into my favorite search engine so as to find what I am looking for.

    I am looking for stainless steel rings, approximately 10mm in diameter, 14 - 16 gage material for the purpose of passing through a 3/8" wide strip of fabric consisting of fine strands of nylon. I have tried split rings and the material snags on the edge of the split in the ring. I need a contiuous ring with no seams. Any suggestions as to what I should search for?

    Thanks,

    Ron

  2. #2
    Technical Fellow Kelly_Bramble's Avatar
    Join Date
    Feb 2011
    Location
    Bold Springs, GA
    Posts
    2,611
    Try "stainless steel ferrule".

  3. #3
    Project Engineer CCR5600Design's Avatar
    Join Date
    Feb 2011
    Location
    Central USA
    Posts
    128
    Thank you, Mr. Bramble.


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •