Results 1 to 4 of 4

Thread: Looking for articles discussing angle axis differences between holes and screws

  1. #1
    Associate Engineer
    Join Date
    Nov 2013
    Posts
    2

    Looking for articles discussing angle axis differences between holes and screws

    Looking for articles discussing angle axis differences between threaded holes and screws.
    Are there errors between the screw axis and axis of the threaded hole that the screw goes into?

  2. #2
    Technical Fellow jboggs's Avatar
    Join Date
    Mar 2011
    Location
    Myrtle Beach, SC
    Posts
    908
    In a perfect world, no. A perfect screw will be perfectly positioned by a perfect thread. So, its simple - make them both perfect!
    Seriously, in the real world there are manufacturing imperfections and clearances involved. The final position of a screw in a threaded hole is affected by many factors so the best you can say is that it is "close". That's why it is NEVER a good idea to try to use screw threads for any kind of precise positioning or alignment.

  3. #3
    Technical Fellow Kelly_Bramble's Avatar
    Join Date
    Feb 2011
    Location
    Bold Springs, GA
    Posts
    2,611
    Quote Originally Posted by jboggs View Post
    In a perfect world, no. A perfect screw will be perfectly positioned by a perfect thread. So, its simple - make them both perfect!
    Seriously, in the real world there are manufacturing imperfections and clearances involved. The final position of a screw in a threaded hole is affected by many factors so the best you can say is that it is "close". That's why it is NEVER a good idea to try to use screw threads for any kind of precise positioning or alignment.

    Good post...

    Also, to compare thread features, see:

    External Thread Size, tolerances and Geometry

    Internal Thread Size, tolerances and Geometry
    Last edited by Kelly_Bramble; 11-27-2013 at 10:56 AM.

  4. #4
    Associate Engineer
    Join Date
    Nov 2013
    Posts
    2
    Thank you,

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •