Results 1 to 1 of 1

Thread: ISOLATOR HV Testing elimination?

  1. #1

    Smile ISOLATOR HV Testing elimination?

    Hi Everyone.

    I am quite curious with digital isolators. I have read that these parts are being tested at a high voltage (kV) to ensure the durability and quality of devices over a life time. The HV testing includes Partial Discharge test and Leakage Test. If the supporting bodies such as UL, VDE and CSA are ignored/not be used as a point of "NOT POSSIBLE", is there a way that the breakdown of ions or forcing stresses in an isolators be possible? i.e. testing it in a lower voltage but longer period of time. Use a DC voltage? Or a way that it could be simulated in a laboratory without using a very large voltage?

    Very important parameters in HV test:
    1. Partial Discharge Test
    2. Leakage Test

    Here is an article i read regarding HV testing.


    I hope you could help me on this. I am currently researching for my thesis and i would really appreciate it if you could throw some ideas and/or suggestions. Thanks.
    Last edited by Kelly_Bramble; 01-29-2014 at 06:57 AM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts