Yes, you can post images... see:
How to post images
I have been working on a very unique clicker writing pen design but hit a brick wall with a part of the mechanism....
I have 3D drawings of my design so far....
Am I allowed to post drawings for you guys to have a look and hopefully give some advice?
Last edited by UK-David; 03-08-2014 at 04:24 AM. Reason: typo's haha
I can't upload the drawings.....maybe because I am a newbie?
I hope the files attached this time....I have followed all the instructions.........
where i the spring you have placed in the bottom...
Is the plan for the central ball, in the second image, to replace the need for a spring?
My pen is not a Grenade but a locked pen!
How does it work:
1. Hold the pen in an upright position then press the push button once
2. Then hold the pen Inverted and press the push button once
3. Then hold the pen upright again and press the push button once and the nib will open
I really need some HELP from you guys on the mechanism design.
Last edited by UK-David; 03-15-2014 at 01:42 PM.
If you keep pressing the button and do not follow the 3 moves listed above the pen just keeps clicking but the nib will not engage so the pen is locked until the correct moves are made...
I have the mechanism working for the 1st and 2nd move but I am stuck on the final 3rd move....
Any advice guys?