Results 1 to 5 of 5

Thread: Sludge Reactor Plant Homework

  1. #1
    Associate Engineer
    Join Date
    Mar 2014
    Posts
    3

    Sludge Reactor Plant Homework

    So I'm completely lost on how to approach this problem, but I'm not familiar with the terms and variables so I'm unable to figure out how everything is related. Any help to set me in the right direction would be appreciated.

    A complete mix activated sludge plant operates at design Q, with the reactor tank volume set by a nominal Θ= 6 hours.
    a) It was anticipated that it would operate at 25% RAS for an expected Xr= 2,000 mg/l. What would the actual Θ be?
    b) The secondary clarifier only produces Xr= 1,000 mg/l, so RAS is increased to 50% Q. What is the actual Θ then? Does the F/M, the MLVSS concentration and SRT change?
    c) The secondary clarifier actually produces 3,000 mg/l Xr, but RAS stays at 25% as originally planned. Do F/M, MLVSS and SRT change from what was planned??

    Obviously Θ is residence time, and Q is flowrate. RAS stands for return activated sludge. What in the world is Xr? I'm guessing it's some type of fraction by the X. Does anyone know how these terms are related in terms of equations?

  2. #2
    Administrator Kelly Bramble's Avatar
    Join Date
    Feb 2011
    Location
    Bold Springs, GA
    Posts
    2,208
    First, convince me that this is not school homework...

  3. #3
    Associate Engineer
    Join Date
    Mar 2014
    Posts
    3
    Quote Originally Posted by Kelly Bramble View Post
    First, convince me that this is not school homework...
    It is. What's wrong with that? There are other topics on here that I see that are asking for calculation help as well. I'm not asking anyone to do it for me.

  4. #4
    Quote Originally Posted by javacola View Post
    It is. What's wrong with that? There are other topics on here that I see that are asking for calculation help as well. I'm not asking anyone to do it for me.

    The rules explicitly indicates "NO HOMEWORK".

    Please re-read the rules

    Engineers Edge Forum Rules and Policy

  5. #5
    This thread has been closed to further posting

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •