Results 1 to 3 of 3

Thread: lifting davit

  1. #1
    Associate Engineer
    Join Date
    May 2014
    Posts
    2

    lifting davit

    Kindly advice on the design of lifting davit using galvanised iron bending(G.I) pipe. The lifting davit is removable and its base platesupported with 12mm dia. bolt (4 nos). The height of this liftingdavit is 1.8 m with bending angle 120 degree to the vertical. The G.Ipipe dia. is 80mm.




    canu advice on the max weight/load that lifting davit can withstand?


    Attached herewith is an example of lifting davit.

    lifting davit.JPG


    TQ

  2. #2
    Technical Fellow Kelly_Bramble's Avatar
    Join Date
    Feb 2011
    Location
    Bold Springs, GA
    Posts
    2,611

  3. #3
    Associate Engineer
    Join Date
    May 2014
    Posts
    2
    Thanks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •