Results 1 to 3 of 3

Thread: Aerogel and cooling compression?

  1. #1
    Associate Engineer
    Join Date
    Aug 2014
    Posts
    1

    Aerogel and cooling compression?

    I would like to manufacture a case a little larger than a glasses case.

    It needs to be insulated with aerogel - and I need to keep the case cooled for 24 hrs with ordinary refrigerator temperature, possible USB connectivity for further cooling.

    Any cooling/compression advice on cooling capabilities this size?

  2. #2
    Principle Engineer Cragyon's Avatar
    Join Date
    Feb 2013
    Location
    Newark, NJ
    Posts
    283
    You can't get any more vague...

  3. #3
    Associate Engineer BSanchezGT's Avatar
    Join Date
    Aug 2014
    Location
    Atlanta, Ga
    Posts
    2
    I agree with Cragyon, this isn't very much information...

    As far as cooling goes, refrigeration is basically a heat pump, there are small units on the market but likely not small enough to suffice what you may be looking for, especially if it may be USB powered. And why do you need aerogel? It is a good insulator but costly for your needs. It isn't inherently cooler or something like that.

    More info is needed.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •