Results 1 to 2 of 2

Thread: Surveying Traversing

  1. #1

    Surveying Traversing

    Hi all

    My apologies if this is not the correct section to post in but it seemed like the closest section for my problem.

    I have carried out a traverse of a carpark (my first traverse).

    I have used a Trimble S8 Total Station to collect a round of angles between 3 points (STN1, STN2,STN2).

    I have exported the data as a .dc 10.7 file and I am now importing the data into Trimble Business Center.

    I have no idea what I am doing and was wondering if someone could look at the .dc file, adjust it to see if my traversing was any good.

    I have been able to adjust the traverse in TBC & I have created a report but I donít understand any of it.

    Can anyone help?
    Attached Files Attached Files

  2. #2
    Senior Engineer
    Join Date
    Sep 2014
    Posts
    35
    Nice information about knowing regarding engeneering techniques.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •