Results 1 to 2 of 2

Thread: Solid Shaft Deflection and Journal Stress

  1. #1
    Associate Engineer
    Join Date
    Jan 2015
    Posts
    1

    Solid Shaft Deflection and Journal Stress

    Hello

    I have a solid shaft roller 4" OD and 48" LG. with journals on either sides with OD of 2" and length 2.5". There is a concentrated load of 5500 lbs over a width of 10" symmetric from the center of the roller. Can someone help me derive or direct me to an equation to calculate the deflection of the roller at the center and the journal stress.

    It can be assumed that the journals are fixed at both ends.

    Thanks in advance.

  2. #2
    Technical Fellow Kelly_Bramble's Avatar
    Join Date
    Feb 2011
    Location
    Bold Springs, GA
    Posts
    2,611
    Last edited by Kelly_Bramble; 10-22-2022 at 01:45 PM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •