Results 1 to 3 of 3

Thread: NEEDED - Swivel hardware solution.

  1. #1
    Associate Engineer
    Join Date
    May 2015

    NEEDED - Swivel hardware solution.

    Hello y'all! I hope this is allowed as I've reached a dead end. I am a holster maker and have a need to a 180 degree swivel on a rig. Attached is the image of the holster I am trying to replicate. Any help with how to make such a thing would be so helpful. Thank you so much!
    Attached Images Attached Images
    Last edited by Kelly_Bramble; 05-30-2015 at 12:02 PM.

  2. #2
    Technical Fellow Kelly_Bramble's Avatar
    Join Date
    Feb 2011
    Bold Springs, GA
    Take a look at a threaded rivet nut. Or, tool-up for a gap controlled rivet installation.

    Attached Images Attached Images
    Tell me and I forget. Teach me and I remember. Involve me and I learn.

  3. #3
    Principle Engineer
    Join Date
    May 2015
    Search internet for "Screw Posts"

    Last edited by Kelly_Bramble; 06-05-2015 at 07:05 AM.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts