Results 1 to 2 of 2

Thread: Suitability of API 620/650 for low pressure tank at 316F

  1. #1
    b8e
    Guest

    Suitability of API 620/650 for low pressure tank at 316F

    Is it acceptable practice to use API 620 code for the design of a storage tank with 5 psig design pressure and 316°F design temperature? I know the code says it is only applicable for up to 250°F, couldn't I use the max allowable stress values found in ASME VIII at the design temperature and plug these into the API 620 equations?

  2. #2
    Technical Fellow Kelly_Bramble's Avatar
    Join Date
    Feb 2011
    Location
    Bold Springs, GA
    Posts
    2,611
    I'm no expert on API 620, so you are refering to 1.2.2:

    "The tanks described in this standard are designed for metal temperatures not greater than 250°F and with pressures in their gas or vapor spaces not more than 15 lbf/in? gauge."

    and 5.2 "Operating Temperature"

    Yes, for the materials defined in the standard exceeding 250°F is a bad idea. I think at around 300°F your stress releiving the tank materials.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •