Results 1 to 2 of 2

Thread: Young's Modulus and elastomers

  1. #1
    Associate Engineer
    Join Date
    Dec 2015
    Posts
    1

    Young's Modulus and elastomers

    Hello,

    I was wondering if Young's modulus is the same as 100% modulus in the rubber world.

    Also, can I use the 100% modulus value to calculate the force required to compress a rubber by a certain amount, say 20%.

    Thank in advance.

  2. #2
    Technical Fellow Kelly_Bramble's Avatar
    Join Date
    Feb 2011
    Location
    Bold Springs, GA
    Posts
    2,611
    I believe "100% modulus" is in reference elongation at 100%. Since Young's Modulus is variable - depending on the amount of elongation the modulus maybe given dependent on applied elongation.

    For an elastomer material - use whatever the engineering specifications provide for the Young's modulus...
    Tell me and I forget. Teach me and I remember. Involve me and I learn.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •