Results 1 to 4 of 4

Thread: A2-70 Material for Washers

  1. #1
    Associate Engineer
    Join Date
    Jun 2016
    Posts
    2

    Question A2-70 Material for Washers

    Hello to all,

    If anyone is familiar with this...
    Is it correct for a DIN125A washer to be made from A2-70 material?
    DIN 125, only refers to A2, and not -70 as a codification method.
    Although i have searched the web and found sources that confirm the use of A2-70
    but i have also read that A2-70 should only be mentioned for screws,nuts and bolts.
    Then again i wonder, why not construct washers from A2-70? Is it an abbreviation matter?

    Thank you in advance.

  2. #2
    Technical Fellow Kelly_Bramble's Avatar
    Join Date
    Feb 2011
    Location
    Bold Springs, GA
    Posts
    2,611
    A washer that conforms to DIN125A can be made from any material of your choosing...


    Tell me and I forget. Teach me and I remember. Involve me and I learn.

  3. #3
    Banned
    Join Date
    Jun 2016
    Posts
    5
    Thanks for the suggestion.

  4. #4
    Associate Engineer
    Join Date
    Jun 2016
    Posts
    2
    That's what i thought.

    Maybe the problem is in the way you order it...
    For example A2-70 is not correct when referring to washers. !..I don't know..

    Thank you.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •