Results 1 to 3 of 3

Thread: Metric gears

  1. #1
    Project Engineer
    Join Date
    Oct 2013
    Posts
    92

    Metric gears

    I have driver and driven shaft at c/c 62.11mm I need a 2:1 ratio. Is this possible?

  2. #2
    Project Engineer
    Join Date
    Oct 2013
    Posts
    92
    Quote Originally Posted by GlennD View Post
    I have driver and driven shaft at c/c 62.11mm I need a 2:1 ratio. Is this possible?

    I should have asked if this was possible with properly meshed metric gears ... and yes, it is certainly is possible.

  3. #3
    Principle Engineer
    Join Date
    May 2015
    Posts
    155
    So the pitch radius of the pinion will be 1/3 of 62.11 or 20.703. Hence the pitch diameter of the pinion will be 41.4 and the pitch circumference 130. The other gear is twice as big

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •