Results 1 to 2 of 2

Thread: Mini-putt course

  1. #1
    Associate Engineer
    Join Date
    Nov 2016
    Posts
    1

    Mini-putt course

    I'm in the process of building a mini-putt course out of lumber but decided I'd like to use aluminum square tubes for the base instead of 2x2 lumber. How I built the one out of lumber is two 8 foot 2x2 on sides and 10 crossers about 10.5" apart. And each corner of the crossers have corner wedged support. I want a do the aluminum base similar to that.

    This base will be have adjustable legs for uneven ground and floors. So height off the ground be around 1".

    What size of aluminum tubing would be required to support weight of 1-2 people standing on it at one time? The course is 30"x96". The base I want aluminum but the walls and platform I'm putting lumber.

    Any advice will be greatly appreciated.
    Last edited by kevin_gagnon; 11-07-2016 at 02:27 PM.

  2. #2
    Project Engineer
    Join Date
    Feb 2011
    Location
    Spokane, WA
    Posts
    130
    I'm intrigued... care to show a drawing of what you're talking about?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •