Results 1 to 3 of 3

Thread: Hydraulic cylinder question

  1. #1
    Associate Engineer
    Join Date
    Jan 2017
    Posts
    1

    Hydraulic cylinder question

    Hello !
    I am working on a project with to antagonistic hydraulic cylinders. They both have two brackets with two screws each, i.e 8 screws in total.

    how do I calculate the load(forces) that will affect the screws once the cylinders are moving?
    I also added an image to make it easier for you guys to understand.


    Attached Images Attached Images

  2. #2
    Technical Fellow jboggs's Avatar
    Join Date
    Mar 2011
    Location
    Myrtle Beach, SC
    Posts
    780
    Are you saying you don't know how to calculate the force generated by a hydraulic cylinder? Or is your question something else?

  3. #3
    Administrator Kelly Bramble's Avatar
    Join Date
    Feb 2011
    Location
    Bold Springs, GA
    Posts
    2,234
    Assuming there are four "all-thread" studs located equally-ish spaced the shear force applied to each stud would be (Force applied by cylinder max)/4 in a perfect world.

    For hydraulic cylinder force calculations, see:
    http://www.engineersedge.com/hydraul...orce_10105.htm

    For the single and double shear force/stress applied to each stud see:

    http://www.engineersedge.com/materia...hear_calcs.htm


    The "all-thread" studs are not meant for large shear loading, you should consider a bolt or stud where the loading is applied to a bolt grip area.

    "all-thread" studs are best used for compression and tension loading

    Attached Images Attached Images
    Tell me and I forget. Teach me and I remember. Involve me and I learn.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •