Results 1 to 2 of 2

Thread: Go-gage help

  1. #1

    Join Date
    May 2017
    Posts
    2

    Go-gage help

    Hello

    I need to update our go-gage to accomodate the dimple. The dimple radius and height has max dimension. The end blend radius locates the 0.420 max. The height dimension will be MMC of the dimple but what about what tolerance to assign? my first guess is 0.032 - .005
    Attached Images Attached Images

  2. #2
    Technical Fellow Kelly_Bramble's Avatar
    Join Date
    Feb 2011
    Location
    Bold Springs, GA
    Posts
    2,611
    The tolerance of the gage is a tool/gage tolerance.. see: http://www.engineersedge.com/mechani...ator_13388.htm
    Tell me and I forget. Teach me and I remember. Involve me and I learn.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •