Results 1 to 4 of 4

Thread: Please help me identify this press, what it's specifically used for? Model? Thanks.

  1. #1
    Associate Engineer
    Join Date
    May 2017
    Posts
    2

    Please help me identify this press, what it's specifically used for? Model? Thanks.


  2. #2
    Administrator Kelly Bramble's Avatar
    Join Date
    Feb 2011
    Location
    Bold Springs, GA
    Posts
    2,099
    There's going to be a identification plate or sticker on it somewhere...

    Look it over..
    Tell me and I forget. Teach me and I remember. Involve me and I learn.

  3. #3
    Associate Engineer
    Join Date
    May 2017
    Posts
    2
    I wish. The one on the back was removed. No other itenotifying marks.

  4. #4
    Associate Engineer
    Join Date
    Jul 2017
    Posts
    3
    @Buckley69692000 , hope you have found out the answer.
    From the pic, it looks like a heat-press machine. People use it the heat a stake to assemble a plastic part and metal part together.
    The timer controls the holding time of the cylinder, the temp indicator shows the temperature currently, the counter shows the times pressed, the air pressure controller shows the air pressure of the cylinder (the pressure hold on the plastic part)
    As the pic shown, normally there will be a fixture on the table to hold the part, make sure the part has fixed during operation.
    Attached Images Attached Images

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •