Results 1 to 1 of 1

Thread: ReBuilding a pneumatic Press- Help!!

  1. #1
    Associate Engineer
    Join Date
    Nov 2017
    Posts
    1

    ReBuilding a pneumatic Press- Help!!

    Hi all,

    This is my first post, after searching the web i feel i'm in the right place!

    I bought recently, as a project, a Flypress that had been pneumatically converted ( i a cylinder on top that simply pushed the ram down) max up and down strokes are limited by microswitches and the the cylinder has two 1/4" bsp connections - pretty standard i think. The pneumatic solenoid is missing and the wiring has been damaged and broken - the machine was put into storage and was working -but over the last year its been cannibalised by other projects and such like. I am a humble sheetmetal fabricator and although i'm very interested and have a little knowledge of pneumatics and basic electrics i need a bit of guidance regarding a wiring diagram. The machine still has a 150v auto transformer, on/off switch and microswitches in position . The machine was used previously for inserting bushes, i'm hoping to do simple folding and punching on it.
    Thanks for looking and would appreciate any advice or links.


    Dave
    Attached Images Attached Images
    Last edited by dave_gilbert; 11-25-2017 at 05:29 AM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •